Detroit Putter Co. The Ambassador Putter Review

We independently review everything we recommend. When you buy through our links, we may earn a commission.
Picture of the sole of The Detroit Putter Co. The Ambassador Putter

50 Words or Less

The Detroit Putter Co. The Ambassador putter makes a powerful first impression with its industrial looking fang shape, shiny milled face, multi-colored grip, and premium presentation in the bag.ย  Accurate inside 12 feet, but a tinny sound, hard feel, and weak-long distance speed control donโ€™t match its stout appearance.

Picture of The Detroit Putter Co. The Ambassador and its DPC signature milled face on the green with a golf ball.

Introduction

In the bag or behind the ball, the Detroit Putter Co. The Ambassador looks like a heavyweight ready to deliver an easy knockout blow.ย  The large, sharp angles of the fang-style mallet head are muscular and intimidating, and the shiny milled face adds to its character.

Everything about The Ambassador screams heavy, stable performance, easy speed on longer putts, with a soft deep feel.ย  What I found was more complicated.ย  While the Detroit Putter Co. The Ambassador has superb presentation and strong short-range capabilities, its tinny sound and weak long-distance performance contrast with its powerful appearance.

Top down picture of The Detroit Putter Co. The Ambassador with a golf ball on a putting green.

Looks

If Mad Max golfed, this would be his putter.ย  The Standard Finish (shown here, also available in Black) stainless steel fang-style mallet is big and beefy with sharp angles making it look more like a medieval weapon than a precision instrument.ย  Its shape is similar to the Bettinardi BB 6.0 [review HERE] but as if itโ€™s been prepared for battle.ย  For early 2000โ€™s hip-hop fans, picture MF Doomโ€™s iconic mask attached to a shaft.

Picture of a closeup of the sole of The Detroit Putter Co. The Ambassador putter

That burly look is amplified by the ~3.5โ€ x 1.5โ€ chrome sole insert, with large Detroit Putter Co. branding and Ambassador Bridge imagery.ย  Rivets in each corner secure the insert adding to The Ambassadorโ€™s rugged, armored appearance.ย  The shiny milled face, with DPC branding stamped on its heel, infuses an unexpected flashy side to the design.

Straignt on picture of the back of The Detroit Putter Co. The Ambassador putter.

At address, the Detroit Putter Co. The Ambassador remains bold and uncomplicated.ย  The head has a wide 3.75โ€ x 3.25โ€ footprint with long, subtly ridged fangs that frame the ball and provide a stable look.ย  A thin black line in the middle is a useful aiming device leaving the top of the face untouched.ย  Black Detroit Putter Co. branding is embossed on the back of the face.ย  Nothing about the Detroit Putter Co. The Ambassador appears delicate.ย  Itโ€™s heavy visually and literally.

Picture of the front of the pistol style grip on The Detroit Putter Co. The Ambassador.

Even the pistol-style grip enhances the look of the Detroit Putter Co. The Ambassador with its contrasting color blocking.ย  The grip is offered in eight different colorways that add personality and make it feel custom.

Picture of the magnetic closing headcover on The Detroit Putter Co. The Ambassador putter.

White & Black Dancing Mitten is the standard headcover colorway protecting the Detroit Putter Co. The Ambassador, but it is available in seven colors.ย  Many of the colorways align with Michigan college and professional sports teams.ย  Detroit Putter Co. branding in all caps wraps the heel area of the headcover.ย  The state of Michigan is embroidered throughout the soft, leather-feeling cover thatโ€™s much more premium than the magnetic cover on the Tour Edge Zero T ZT-3 Putter [review HERE].ย  ย With a large Detroit Putter Co. โ€œDโ€ logo on the strap, thereโ€™s no ambiguity who the manufacturer is. [See Price / Buy]

Picture of the DPC signature milling on the face of The Detroit Putter Co. The Ambassador putter.

Sound & Feel

Looking like an armored tank, I rolled my first putts on the practice green with the Detroit Putter Co. The Ambassador excited for the soft, deep, and smooth tone I was sure to hear at impact.ย  However, The Ambassadorโ€™s 431 stainless steel construction and โ€œDPC signature milled face,โ€ created a higher-pitch and sharper tone at impact than the 303 stainless steel in my gamer.ย  Although it looks like it should sound heavy and deep, the sharp, bright, metallic tone of the Detroit Putter Co. The Ambassador doesnโ€™t match its appearance.

Given the higher tone, harder steel, and relatively shallow face milling, rolling putts with the Detroit Putter Co. The Ambassador felt sharp and quick rather than soft and solid like the Bettinardi BB 7.0 [review HERE]. On direct center strikes, thereโ€™s a more muted feel, but toe-side contact was harsh and heel-side contact even firmer.

Picture of a closeup view of the DPC signature milling on The Detroit Putter Co. The Ambassador putter.

Performance

With its 3.25โ€ fangs, 375 gram head, F2.5 swingweight (as tested), slight toe hang, and burly appearance, the Detroit Putter Co. The Ambassador looks built for stability and easy speed.ย  However, in testing, The Ambassador was better on shorter putts where feedback and alignment mattered most, while it lacked the speed and power its solid look suggested.

Picture of the backside, alignment aid, and fangs on The Detroit Putter Co. The Ambassador putter.

The sharp sound and firm feel of the Detroit Putter Co. The Ambassador was an asset on putts inside 12 feet.ย  I instantly felt the quality of the strike and had an improved sense of control on putts where it was imperative to hit the start line correctly.ย  The firm feel made it easy to identify strike location, so The Ambassador was helpful on the practice green as I worked on stroke accuracy.

Check out the zero torque Detroit Putter Co. 313 ZT HERE

Picture of the front and side of The Detroit Putter Co. The Ambassador an its DPC signature milled face.

Longer putts, especially uphill, proved more challenging.ย  While I expected the Detroit Putter Co. The Ambassador to blast the ball uphill, I was surprised how much effort was required to get the ball to the hole.ย  As I worked to dial-in distance control on lag putts, I had to keep adding extra power which made my stroke less natural and the speed challenging to control.ย  I was alternating between too long and too short and began โ€œguessingโ€ rather than โ€œfeeling.โ€

Picture of the bottom and sole plate on The Detroit Putter Co. The Ambassador putter.

The double bend shaft (also available in a plumberโ€™s neck) has a .600โ€ butt end diameter delivering a stable feel through impact.ย  The shaft positioned The Ambassador naturally at address, making it easy to get my hands and posture into a repeatable setup.

The pistol-style grip, similar to a SuperStroke Zenergy Pistol 1.0 [review HERE], fit my hands well, giving me a good sense of face position throughout the stroke.ย  A minor drawback is the headcoverโ€™s overpowered magnetic closure grabbed The Ambassador every time I took off or replaced the cover. [See Price / Buy]

Top down picture of the full The Detroit Putter Co. The Ambassador putter with the color blocking on the pistol grip featured.

Conclusion

Thereโ€™s a lot to like when looking at the Detroit Putter Co. The Ambassador.ย  A bold armored appearance, aggressive fang-style, shiny DPC signature milled face, and selectable grip and headcover colors give The Ambassador a distinctive, custom, and powerful look.

On the green, performance didnโ€™t match the look.ย  The Detroit Putter Co. The Ambassador was accurate inside 12 feet where firm feedback and clean alignment helped with control, but the tinny sound, harsh feel on mishits, and weak long-distance performance were impossible to ignore.ย  Golfers who want a distinctive Michigan-made, face-milled mallet with strong short-range control should give The Ambassador a look.ย  For a soft, powerful, forgiving putter, golfers should look elsewhere. [See Price / Buy]

Detroit Putter Co. The Ambassador

DPC's newest mallet style head in all silver. The Ambassador is a winged shaped mallet with the DPC signature milled face. The body is made of 431 Stainless Steel and milled in Michigan.

Help support our mission. We earn a commission if you make a purchase, at no additional cost to you.

John Morrison
Latest posts by John Morrison (see all)

12 Comments

  1. They should get in the low/zero torque game because that is a pretty looking putter.

    #BushnellGiveaway

  2. Patrick Burke

    The Arby’s roast beef sandwich is defenseless. No adult dares to go back without paying a price. #BushnellGiveaway

  3. Douglas Kalahar

    The Detroit putters are super cool looking, lobe the options on grips and headcovers. Would like to see an alignment mark on top of putter head. I need all the help I need.
    I will make a whole lot more putts with accurate fairway shots with my Bushnell rangefinder
    #BushnellGivaway

    • Hi Douglas,

      Thanks for reading and leaving a comment. Initially, I thought the same thing about the alignment aid. However, throughout testing, I began to enjoy (even prefer) the single black line without a mark on the top of the putter head.

      Good luck!

      Thanks,
      John

  4. Kevin Polischuk

    If you use Sasho Mackenzieโ€™s heads up putting method does it really matter what flat stick you have in your hands? I find myself more tension free.
    My lag putting is better. And Iโ€™ve been making more 5 to 10 footers and I ever have before.
    #Bushnell Giveway

    • Hi Kevin,

      Thanks for reading. Few things better than when the flat stick is working! Starting the ball on the correct line and at the intended speed is always imperative and influenced by the putter used.

      Good luck!

      Thanks,
      John

  5. Initially I didn’t care for fang-style putters, but now they are my preferred shape/design. I like the appearance of this putter, but not of its grip. I want a more understated look; I would re-grip this putter. To me, performance is what matters most. I immediately would be turned off by a tinny sound and harsh feel.. Also, long-distance accuracy and performance are key factors in evaluating putters for my game.

    #BushnellGiveaway

    • Hi Steve,

      It took me a bit to warm up to them as well, but they’re now my preferred shape too. The Ambassador is gorgeous (and The Detroit Putter Co. offers more understated grip color options), but sound and distance control are certainly imperative to consider. Best of luck!

      Thanks,
      John

  6. Larry Chopchik

    Just read your review on the Detroit putter. Sounds like a great putter. I see it has an embossed Ambassador Bridge with USA and Canada on the putter.
    Itโ€™s too bad Canadians arenโ€™t eligible for the draw according to the rules. ๐Ÿ˜ข

Leave a Comment

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

 

Plugged In Golf's Mission Is Made Possible With Support From:


Latest

Recent Reviews